2005 kawasaki KX 250 F

2005 kawasaki KX 250 F

Bleeding front brakes

I just got some work done on my bike and had the forks changed....so the front calipers were removed and reintalled. After that, I changed the entire right clip-on with master cylinder. I'm tring to bleed the front brakes but not getting anywhere with it. I bought a $7 bleeder from autozone and started by bleeding the calipers first one side at a time. I slightly loosened the nut, insert the bleeder tip, pressed in the lever, loosen the nut more and fluid starts to go through the bleeder, then tighten the nut and pump the brake lever once...repeated this until fluid is clearly through the blee

★ ★ ★ ★ ☆ 4.0 stars

2005 kawasaki KX 250 F

Product Troubleshooting for 2005 kawasaki KX 250 F

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :

Bleed the master first, make sure that there is plenty of fluid going through there and all the air is out. Then, once the master is fully bled, the fluid will pull through the lines quickly. Just do one line at a time, and once you do them both and get good pressure you want to zip tie the lever to the bar overnight to make sure you get all the little bubbles out. Hope that helps.
Having problems with your 2005 kawasaki KX 250 F ?

Loading ...

Load time: 0.0127 seconds